renamed fitter_check to mode_match_demo to reflect it purpose

1 files changed, 39 insertions, 0 deletions

diff --git a/mode_match_demo.m b/mode_match_demo.m
new file mode 100644
index 0000000..b7866ae
--- /dev/null
+++ b/mode_match_demo.m
@@ -0,0 +1,39 @@
+%Permute all possible lens combinations out of set of lenses
+lens_set = [.075, .203]; %Given lenses of unique focal lengths
+lens_permutations = pick(lens_set,3,'or'); %3 lens solutions
+
+%Pre-defined Constants
+lambda= 1.064E-6 ; %Wavelength of beam
+Ltot= 1.010675025828971 ; %Length of optical system
+r0= 1.0E+100 ; %Initial radius of curvature
+w0= 2.563E-5 ; %Initial waist
+x0= 0 ; %Starting position of beam
+wf= 3.709E-5 ; %Desired final waist
+rf= 1.0E+100 ; %Desired final radius
+lens_width = .03; %Lens width
+show_lens_width = 1; %Set to 1 to enable display of lens width on solution propagation plot
+show_lens_position = 1; %Set to 1 to enable display of position of center of lens on solution propagation plot
+display_prop = [show_lens_width, show_lens_position];
+n_truncate = 3; %number of digits in truncated solution
+n_visualizations = 2; %number of best solutions to visualize
+n_hist = 1000; %number of sample points in histogram
+stability_max = 1; %max stability (y-axis) shown on energy vs. stability graph
+self_flag = 0; %Set to 1 to use Self's gaussian beam propagation, otherwise set to 0
+%End list
+
+q0=wr2q(w0,r0,lambda); %Calculate intial q
+qf=wr2q(wf,rf,lambda); %Calculate final q
+
+%Mode match
+[ possible_lens_placement, initial_lens_placement, possible_lens_set, possible_sample_energy] = mode_match( q0, qf, Ltot, lambda, lens_permutations, lens_width, self_flag );
+
+%Remove similar solutions
+[ possible_lens_placement_uniq, possible_lens_placement, possible_sample_energy, possible_lens_set, index ] = remove_similar_soln( possible_sample_energy, possible_lens_placement, possible_lens_set, n_truncate );
+
+
+%Visualize solutions
+pick_visualization( possible_sample_energy, possible_lens_placement_uniq, possible_lens_placement, possible_lens_set, index, n_visualizations, q0, qf, Ltot, lambda, lens_width, display_prop );
+
+%Plot energy vs. stability for each solution
+[stability] = stability_visualization( possible_lens_placement_uniq, q0, qf, Ltot, possible_lens_placement, possible_lens_set, lambda, n_visualizations, n_hist, index, self_flag );
+energy_vs_stability( possible_sample_energy, stability, index, stability_max)