ditch out experiment with ceramic resistor from superconductivity lab

1 files changed, 6 insertions, 6 deletions

diff --git a/supcon.tex b/supcon.tex
index 50ca592..b8d2306 100644
--- a/supcon.tex
+++ b/supcon.tex
@@ -153,14 +153,14 @@ near the critical temperature (6.4-4.5 mV). Make a plot of
 
 \end{enumerate}
 
-\section*{Resistance of a ceramic resistor}
-\begin{enumerate}
-\item Attach a ceramic resistor to a multimeter reading resistance ($k\Omega$ range). Record the room temperature resistance.
+%\section*{Resistance of a ceramic resistor}
+%\begin{enumerate}
+%\item Attach a ceramic resistor to a multimeter reading resistance ($k\Omega$ range). Record the room temperature resistance.
 
-\item Dunk the resistor in liquid nitrogen. Wait until it stops boiling. Record the resistance at this low temperature ($\approx$77 K).
+%\item Dunk the resistor in liquid nitrogen. Wait until it stops boiling. Record the resistance at this low temperature ($\approx$77 K).
 
-\item Take the resistor out of the nitrogen and carefully set it down. Record the resistance as the temperature increases. Make a plot of the measured resustance vs temperature. Compare the plots for the superconductor and the normal resistor, and explain the differences.
-\end{enumerate}
+%\item Take the resistor out of the nitrogen and carefully set it down. Record the resistance as the temperature increases. Make a plot of the measured resustance vs temperature. Compare the plots for the superconductor and the normal resistor, and explain the differences.
+%\end{enumerate}
 
 \hskip-.8in\includegraphics[height=5in]{./pdf_figs/mvtok}