1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
|
from qolab.hardware.basic import BasicInstrument
from qolab.hardware.power_supply import PowerSupplySCPI
import time
class KeysightE3612A(PowerSupplySCPI):
"""Keysight E3612A power supply"""
def __init__(self, resource, *args, **kwds):
super().__init__(resource, *args, **kwds)
self.resource.read_termination = "\n"
self.config["Device model"] = "Keysight E3612A"
self.numberOfChannels = 3
self.deviceProperties.update({"OpMode"})
self.channelProperties = {
"IsOn",
"Regulation",
"Vout",
"Vlimit",
"Iout",
"Ilimit",
"dV",
"dI",
}
self.deffaultChannelR = 47
# used if no empirical way to calculate it via Vout/Iout
def getChandV(self, chNum):
"""Get voltage precision per channel.
Obtained from data sheet.
Alternative estimate is by assuming 14 bit precision from the maximum reading.
"""
if chNum == 1:
return 0.24e-3
return 1.5e-3
def getChandI(self, chNum):
"""Current precision per channel.
Obtained from data sheet.
Alternative estimate is by assuming 14 bit precision from the maximum reading.
"""
if chNum == 1:
return 0.2e-3
return 0.160e-3 # see specification for high current > 20mA
def getOpMode(self):
""" Queries power supply operation mode, returns OFF|PAR|SER|TRAC.
OFF stands for independent channels
"""
qstr = "OUTP:PAIR?"
rstr = self.query(qstr)
return rstr
def setOpMode(self, val):
"""Sets power supply operation mode, returns OFF|PAR|SER|TRAC.
OFF stands for independent channels.
"""
cmnd = f"OUTP:PAIR {val}"
self.write(cmnd)
def setChanOn(self, chNum):
"""Power up channel output"""
self.write(f"OUTP ON,(@{chNum})")
def setChanOff(self, chNum):
"""Power down channel output"""
self.write(f"OUTP OFF,(@{chNum})")
@BasicInstrument.tsdb_append
def getChanIsOn(self, chNum):
"""Queries channel output state"""
qstr = f"OUTP? (@{chNum})"
rstr = self.query(qstr)
return bool(float(rstr))
@BasicInstrument.tsdb_append
def getChanRegulation(self, chNum):
"""Queries channel output regulation
0 - The output is off and unregulated
1 - The output is CC (constant current) operating mode
2 - The output is CV (constant voltage) operating mode
3 - The output has hardware failure
"""
qstr = f"STAT:QUES:INST:ISUM{chNum}:COND?"
rstr = self.query(qstr)
return int(rstr)
@BasicInstrument.tsdb_append
def getChanVout(self, chNum):
qstr = f"MEAS:VOLT? (@{chNum})"
rstr = self.query(qstr)
return float(rstr)
@BasicInstrument.tsdb_append
def getChanVlimit(self, chNum):
qstr = f"SOUR:VOLT? (@{chNum})"
rstr = self.query(qstr)
return float(rstr)
@BasicInstrument.tsdb_append
def setChanVlimit(self, chNum, val):
if val < 0:
val = 0
if chNum == 1 and val > 6.180:
val = 6.180
if (chNum == 2 or chNum == 3) and val > 25.750:
val = 25.750
cmnd = f"SOURCe:VOLT {val},(@{chNum})"
self.write(cmnd)
@BasicInstrument.tsdb_append
def getChanIout(self, chNum):
qstr = f"MEAS:CURR? (@{chNum})"
rstr = self.query(qstr)
return float(rstr)
def setChanIout_mA(self, chNum, val, **kwds):
"""Set current in mA.
Calls setChanIout with val converted from mA to A.
"""
return self.setChanIout(chNum, val / 1000.0, **kwds)
@BasicInstrument.tsdb_append
def setChanIout(self, chNum, val, currentHeadRoom=1e-3, dwellTime=0.3):
"""Set current in the channel.
We will tune Vout to achieve desired Iout.
Generally setting current limit will maintain current near
but not exact to desired value.
Since Vlimit can be set with good precision,
this function will try tune Vlimit until the Idesired is reached.
"""
iDesired = val
# self.setChanIlimit(chNum, val+currentHeadRoom)
# Here, we assume that hook up is already made, so we can estimate source resistance
# So the protocol is the following:
# find R -> calculate required Vout for the desired Idesired
# -> set Vlimit to reach desired Vout and Iout
# In general, once we estimate resistance of the load + source, we do not need to
# anything extra. But there is a problem: for a given Vlimit setting, the actual Vout
# is slightly off.
# We will assume that Vlimit = R*Iout + Vo = Vout + Vo, i.e. linear approximation
for i in range(10):
iOut = self.getChanIout(chNum)
if abs(iOut - iDesired) <= self.getChandI(chNum):
break
vOut = self.getChanVout(chNum)
if self.getChanRegulation(chNum) == 2: # i.e. CV mode
vLimit = self.getChanVlimit(chNum)
Vo = vLimit - vOut
else:
Vo = 0
if (iOut == 0) or (
vOut <= 0.001
): # when vOut set to 0 the numbers are misreported
R = self.deffaultChannelR # some default
else:
R = vOut / iOut
vDesired = R * iDesired
self.setChanVlimit(chNum, vDesired + Vo)
time.sleep(dwellTime)
@BasicInstrument.tsdb_append
def getChanIlimit(self, chNum):
qstr = f"SOURce:CURR? (@{chNum})"
rstr = self.query(qstr)
return float(rstr)
@BasicInstrument.tsdb_append
def setChanIlimit(self, chNum, val):
"""Set current limit, seems to be >=0.002 for Ch1 and >=0.001 for Ch2 and Ch3"""
if chNum == 1 and val < 0.002:
val = 0.002
if chNum == 1 and val > 5.150:
val = 5.150
if (chNum == 2 or chNum == 3) and val < 0.001:
val = 0.001
if (chNum == 2 or chNum == 3) and val > 1.030:
val = 1.030
cmnd = f"SOURCe:CURR {val},(@{chNum})"
self.write(cmnd)
if __name__ == "__main__":
import pyvisa
print("testing")
rm = pyvisa.ResourceManager()
print(rm.list_resources())
instr = rm.open_resource("USB0::10893::4354::MY61001869::0::INSTR")
ps = KeysightE3612A(instr)
print("------ Header start -------------")
print(str.join("\n", ps.getHeader()))
print("------ Header ends -------------")
|
