"""
Created by Eugeniy E. Mikhailov 2021/11/29
"""

from qolab.hardware.scope import ScopeSCPI
from qolab.data.trace import Trace
import re
import numpy as np

class SDS1104X(ScopeSCPI):
    """ Siglent SDS1104x scope """
    vertDivOnScreen = 10
    horizDivOnScreen = 14
    def __init__(self, resource):
        super().__init__(resource)
        self.resource.read_termination='\n'
        self.numberOfChannels = 4
        self.maxRequiredPoints = 1000; # desired number of points per channel, can return twice more

    def response2numStr(self, strIn, firstSeparator=None, unit=None):
        # A typical reply of Siglent is in the form 'TDIV 2.00E-08S'
        # i.e. "<prefix><firstSeparator><numberString><unit>
        # prefix='TDIV', firstSeparator=' ', numberString='2.00E-08', unit='S'
        # this function parses the reply
        spltStr = re.split(firstSeparator, strIn)
        prefix = spltStr[0]
        rstr = spltStr[1]
        spltStr = re.split(unit, rstr)
        numberString = spltStr[0]
        unit = spltStr[1]
        return (prefix, numberString, unit)

    def mean(self, chNum):
        # get mean on a specific channel calculated by scope
        # PAVA stands for PArameter VAlue
        qstr = f'C{chNum}:PAVA? MEAN'
        rstr = self.query(qstr); 
        # reply is in the form 'C1:PAVA MEAN,3.00E-02V'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=',', unit='V')
        return(float(numberString))

    def getAvailableNumberOfPoints(self, chNum):
        if chNum != 1 and chNum != 3:
            # for whatever reason 'SAMPLE_NUM' fails for channel 2 and 4
            chNum = 1
        qstr = f'SAMPLE_NUM?  C{chNum}'
        rstr = self.query(qstr)
        # reply is in the form 'SANU 7.00E+01pts'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='pts')
        return(int(float(numberString)))
            
    def getSampleRate(self):
        rstr = self.query('SAMPLE_RATE?');
        # expected reply is like 'SARA 1.00E+09Sa/s'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='Sa/s')
        return(int(float(numberString)))

    def calcSparsingAndNumPoints(self, availableNpnts=None, maxRequiredPoints=None):
        if availableNpnts is None:
            # using channel 1 to get availableNpnts
            availableNpnts = self.getAvailableNumberOfPoints(1)
        if maxRequiredPoints is None:
            maxRequiredPoints = self.maxRequiredPoints

        if availableNpnts <= maxRequiredPoints*2:
            Npnts = availableNpnts
            sparsing = 1
        else:
            sparsing = int(np.floor(availableNpnts/maxRequiredPoints))
            Npnts = int(np.floor(availableNpnts/sparsing))
        return(sparsing, Npnts, availableNpnts, maxRequiredPoints)

    def getRawWaveform(self, chNum, availableNpnts=None, maxRequiredPoints=None):
        (sparsing, Npnts, availableNpnts, maxRequiredPoints) = self.calcSparsingAndNumPoints(availableNpnts, maxRequiredPoints)
        if sparsing == 1 and Npnts == availableNpnts:
            # we are getting all of it
            cstr = f'WAVEFORM_SETUP NP,0,FP,0,SP,{sparsing}'
            # technically when we know Npnts and sparsing
            # we can use command from the follow up 'else' clause
        else:
            cstr = f'WAVEFORM_SETUP SP,{sparsing},NP,{Npnts},FP,0'
            # Note: it is not enough to provide sparsing (SP),
            # number of points (NP) needed to be calculated properly too!
            # From the manual
            # WAVEFORM_SETUP SP,<sparsing>,NP,<number>,FP,<point> 
            # SP Sparse point. It defines the interval between data points.
            # For example:
            #   SP = 0 sends all data points.
            #   SP = 1 sends all data points.
            #   SP = 4 sends every 4th data point
            # NP — Number of points. It indicates how many points should be transmitted.
            # For example:
            #   NP = 0 sends all data points.
            #   NP = 50 sends a maximum of 50 data points.
            # FP — First point. It specifies the address of the first data point to be sent.
            # For example:
            #   FP = 0 corresponds to the first data point.
            #   FP = 1 corresponds to the second data point
        self.write(cstr)

        qstr = f'C{chNum}:WAVEFORM? DAT2'
        wfRaw=self.query_binary_values(qstr, datatype='b', header_fmt='ieee', container=np.array, chunk_size=(Npnts+100)) 
        # expected full reply: 'C1:WF DAT2,#9000000140.........'
        return(wfRaw, availableNpnts, Npnts)

    def getChanVoltsPerDiv(self, chNum):
        qstr = f'C{chNum}:VDIV?'
        rstr = self.query(qstr)
        # expected reply to query: 'C1:VDIV 1.04E+00V'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='V')
        return(float(numberString))

    def getChanOffset(self, chNum):
        qstr = f'C{chNum}:OFST?'
        rstr = self.query(qstr)
        # expected reply to query: 'C1:OFST -1.27E+00V'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='V')
        return(float(numberString))

    def getTimePerDiv(self):
        qstr = f'TDIV?'
        rstr = self.query(qstr)
        # expected reply to query: 'TDIV 2.00E-08S'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='S')
        return(float(numberString))

    def getTrigDelay(self):
        qstr = f'TRIG_DELAY?'
        rstr = self.query(qstr)
        # expected reply to query: 'TRDL -0.00E+00S'
        prefix, numberString, unit = self.response2numStr(rstr, firstSeparator=' ', unit='S')
        return(float(numberString))


    def getWaveform(self, chNum, availableNpnts=None, maxRequiredPoints=None):
        wfRaw, availableNpnts, Npnts = self.getRawWaveform(chNum, availableNpnts=availableNpnts, maxRequiredPoints=maxRequiredPoints)
        VoltageOffset = self.getChanOffset(chNum)
        VoltsPerDiv = self.getChanVoltsPerDiv(chNum)
        return( wfRaw * VoltsPerDiv * self.vertDivOnScreen/250 -VoltageOffset, availableNpnts )

    def getTimeTrace(self, availableNpnts=None, maxRequiredPoints=None):
        (sparsing, Npnts, availableNpnts, maxRequiredPoints) = self.calcSparsingAndNumPoints(availableNpnts, maxRequiredPoints)
        sampleRate = self.getSampleRate()
        timePerDiv = self.getTimePerDiv()
        trigDelay  = self.getTrigDelay()
        if Npnts is None and sparsing is None:
            # using channel 1 as reference
            Npnts = self.getAvailableNumberOfPoints(1)
        t = np.arange(Npnts) / sampleRate * sparsing;
        t = t - timePerDiv * self.horizDivOnScreen/2 - trigDelay
        return(t)
        
    def getTrace(self, chNum, availableNpnts=None, maxRequiredPoints=None):
        wfVoltage, availableNpnts = self.getWaveform( chNum, availableNpnts=availableNpnts, maxRequiredPoints=maxRequiredPoints)
        t = self.getTimeTrace(availableNpnts=availableNpnts, maxRequiredPoints=maxRequiredPoints)
        tr = Trace( f'Ch{chNum}' )
        tr.xlabel = 'Time'
        tr.xunit = 'S'
        tr.ylabel = 'Voltage'
        tr.yunit = 'V'
        tr.x = t
        tr.y = wfVoltage
        return( tr )


if __name__ == '__main__': 
    import pyvisa
    print("testing")
    rm = pyvisa.ResourceManager()
    print(rm.list_resources())    
    instr=rm.open_resource('TCPIP::192.168.0.61::INSTR')
    scope = SDS1104X(instr)
    print(f'ID: {scope.idn}')
    print(f'Ch1 mean: {scope.mean(1)}')
    print(f'Ch1 available points: {scope.getAvailableNumberOfPoints(1)}')
    print(f'Sample Rate: {scope.getSampleRate()}')
    print(f'Time per Div: {scope.getTimePerDiv()}')
    print(f'Ch1 Volts per Div: {scope.getChanVoltsPerDiv(1)}')
    print(f'Ch1 Voltage Offset: {scope.getChanOffset(1)}')
    ch1  = scope.getTrace(1)