From c12868d67f4e9dc450564eaf57c0352b9cc2989a Mon Sep 17 00:00:00 2001 From: "Eugeniy E. Mikhailov" Date: Wed, 11 Sep 2019 22:57:42 -0400 Subject: change figure size to fit in a page --- interferometry.tex | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'interferometry.tex') diff --git a/interferometry.tex b/interferometry.tex index 7ca903f..c55c206 100644 --- a/interferometry.tex +++ b/interferometry.tex @@ -210,7 +210,7 @@ In reality, the Na discharge lamp produces a doublet - two spectral lines that a \begin{figure} \centering -\includegraphics[width=0.8\linewidth]{./pdf_figs/fpfig3} \caption{\label{fpfig3.fig}The Fabry-Perot Interferometer. \textbf{For initial alignment the laser and the convex lens are used instead of the Na lamp.}} +\includegraphics[width=0.7\linewidth]{./pdf_figs/fpfig3} \caption{\label{fpfig3.fig}The Fabry-Perot Interferometer. \textbf{For initial alignment the laser and the convex lens are used instead of the Na lamp.}} \end{figure} Disassemble the Michelson Interferometer, and assemble the Fabry-Perot interferometer as shown in Figure~\ref{fpfig3.fig}, initially using the laser for alignment instead of the sodium lamp. First, place the viewing screen behind the two partially-reflecting mirrors ($P1$ and $P2$), and adjust the mirrors such @@ -284,7 +284,7 @@ Use this equation and your experimental measurements to calculate average value \begin{figure}[h] \centering -\includegraphics[width=0.7\linewidth]{./pdf_figs/fpfig4} +\includegraphics[width=0.60\linewidth]{./pdf_figs/fpfig4} \\ \centering \begin{subfigure}[t]{0.18\textwidth} -- cgit v1.2.3