<b>BNC, PCB, vertical</b>, Amp, e.g. isolated 5227222-6, nut 1-329631-2, lock washer 1-329632-2.<br> Non-isolated use conn 5227673-1, nut 1-329631-2, lock washer 1-329632-2, shoulder washer 330620.<br> http://www.tycoelectronics.com >NAME >VALUE <b>BNC PCB <u>Horizontal</u> mount connector</b>, Amp, horizontal, 0.1" grid, types such as 227677-1.<br> Don't forget the nut 1-329631-2 and maybe the shoulder washer 330620.<br> Now with new & improved mtg holes compared to ...TYPE2...!<br> The section of the BNC hanging over the edge of the PCB is in layer 49 (Reference).<br> http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&PN=227677-1&M=STARTSWITH&LG=1&I=13&button.x=0&button.y=0 >NAME >VALUE >NAME >VALUE BNC <b>BNC PCB, horizontal or vertical</b>, e.g. vertical: Amp 227677-1, nut 1-329631-2, shoulder washer 330620.<br> The two shield connections allow the assembly on either side of the board.<br> Horiz isolated: 5227222-6, http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&TCPN=5227222-6&RQPN=5227222-6 http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&PN=227677-1&M=STARTSWITH&LG=1&I=13&button.x=0&button.y=0<br> http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&PID=4946&PN=227673-1&I=13 <b>Small Outline Package 8</b><br> NS Package M08A >NAME >VALUE <b>Dual In Line Package</b> >NAME >VALUE >NAME >VALUE V+ V- Simplified OpAmp similar to OPA27 but with invisible optional pins >NAME >VALUE 2 1 3 >NAME >VALUE G >NAME >VALUE 1 GND >NAME TE connnector part #640456-3 3 pin connector for signals >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor SMD 1206 Capacitor SMD0805 Polarized capacitor SMD 1206 >NAME >NAME >VALUE 2 1 3 >NAME >VALUE >NAME >VALUE Off board trimmer Testpads >NAME >VALUE >NAME Test point through hole ON and OFF board switches >NAME >VALUE 2 1 3 >NAME >VALUE Off board switch >VALUE >VALUE >VALUE <b>SUPPLY SYMBOL</b> <b>SUPPLY SYMBOL</b> <b>SUPPLY SYMBOL</b> R6=2xR31 to make the gain of the proportional part 1 R6 should also follow the rule of 10 with the 10k pot for the proportional gain PI Servo Designed by Owen Wolfe and Eugeniy E. Mikhailov Summing amplifier with offset Power hookup PI part June 2014 v1.0 Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.