BNC, PCB, vertical, Amp, e.g. isolated 5227222-6, nut 1-329631-2, lock washer 1-329632-2. Non-isolated use conn 5227673-1, nut 1-329631-2, lock washer 1-329632-2, shoulder washer 330620. http://www.tycoelectronics.com >NAME >VALUE BNC PCB Horizontal mount connector, Amp, horizontal, 0.1" grid, types such as 227677-1. Don't forget the nut 1-329631-2 and maybe the shoulder washer 330620. Now with new & improved mtg holes compared to ...TYPE2...! The section of the BNC hanging over the edge of the PCB is in layer 49 (Reference). http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&PN=227677-1&M=STARTSWITH&LG=1&I=13&button.x=0&button.y=0 >NAME >VALUE >NAME >VALUE BNC BNC PCB, horizontal or vertical, e.g. vertical: Amp 227677-1, nut 1-329631-2, shoulder washer 330620. The two shield connections allow the assembly on either side of the board. Horiz isolated: 5227222-6, http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&TCPN=5227222-6&RQPN=5227222-6 http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&PN=227677-1&M=STARTSWITH&LG=1&I=13&button.x=0&button.y=0 http://catalog.tycoelectronics.com/TE/bin/TE.Connect?C=1&M=BYPN&PID=4946&PN=227673-1&I=13 Small Outline Package 8 NS Package M08A >NAME >VALUE Dual In Line Package >NAME >VALUE >NAME >VALUE OPT2 OPT3 OPT1 V+ V- Generic 8 pin opamp like u741, opa27 or opa37 >NAME >VALUE G >NAME >VALUE 1 GND TE connnector part #640456-3 >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE >NAME >VALUE Resistor SMD 1206 Capacitor SMD0805 Polarized capacitor SMD 1206 Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE >VALUE SUPPLY SYMBOL SUPPLY SYMBOL Supply Symbols GND, VCC, 0V, +5V, -5V, etc. Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals. The pin name defined in the symbol is identical to the net which is to be wired automatically. In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic. <author>Created by librarian@cadsoft.de</author> >VALUE SUPPLY SYMBOL >NAME >NAME >VALUE 2 1 3 >NAME >VALUE >NAME >VALUE Off board trimmer Testpads >NAME >VALUE >NAME Test point through hole ON and OFF board switches >NAME >VALUE 2 1 3 >NAME >VALUE Off board awitch R6=2xR31 to make the gain of the proportional part 1 R6 should also follow the rule of 10 with the 10k pot for the proportional gain PI Servo Designed by Owen Wolfe and Eugeniy Mikhailov June 2014 Since Version 6.2.2 text objects can contain more than one line, which will not be processed correctly with this version.